Introduction of standard configuration of four-wheeled side-turning bucket emptying trucks

What are the standard features of a 4-wheeled side dump bucket emptier? The following look together.

The effective volume of four-wheeled side-turning bucket emptying truck is from 4.5 cubic meters to 20 cubic meters, curved or rectangular compartments are made of national standard Q345 manganese plate, 9 hydraulic cylinders for braking, the hydraulic control operating system has automatic control and manual control, the manual control is to prevent the electric control from failing when it can't work properly, the loading cycle is a one-button operation, a set for the rear, a set for the left side, and a set of electric unloading operating system in the driver's compartment with rear tipping mechanism (matching with iron garbage bucket), the bottom of the filler is equipped with a sewage collection box, into which the sewage in the trunk can flow, and it can be discharged through the ball valve when unloading the garbage, and the lower part of the front of the trunk is equipped with a sewage collection box, which collects sewage in the box, and discharges it through the ball valve at regular intervals.
What are the main features of the four-wheeled side-turning bucket emptying truck? Here together.

1. Tooling and standardized welding assembly process, strong consistency of the whole vehicle, full coverage of the rear structural parts, beautiful appearance.

2. Advanced CAN communication electronic control system, good stability, high-definition screen display, can automatically diagnose and prompt failure.

3. Adopting two-way compression technology, optimized hydraulic system and advanced press-loading structure design, the press-loading operation has larger compression force and compression ratio, and the push plate simulates the filling direction of the garbage (curved surface) to ensure that the garbage of different compositions are compressed uniformly by the pressure and fill up the whole trunk, with no dead corners, no gaps, and no blockage, which greatly increases the net loading capacity of the garbage.

4. The structure of the push plate slide rail is a grooved rail on both sides, which has the advantages of high rigidity of the rail, good stability, no deformation of the bottom plate, smooth movement of the push plate, clean garbage discharge and reliable work compared with the rail placed on the bottom plate of the trunk.

5. Compared with the domestic constant pressure and high pressure system, the optimized medium pressure and variable pressure hydraulic system has the advantages of fast dynamic response, low internal heat loss, high working efficiency, short working cycle time, simple operation, etc. It works especially reliably and has low failure rate.

6. 4 heavy hydraulic oil filters (inlet high pressure filter element, return oil leakage filter element, hydraulic oil tank inlet and outlet filter element) are equipped as standard to solve the phenomenon of oil valve jamming.

7. Middle sewage pipe design to prevent sewage leakage, hopper and sewage bin integrated design, to solve the problem of secondary pollution such as running, bubbling, dripping, leaking, etc., to avoid the phenomenon of secondary pollution in the process of compression and loading and transportation of garbage trucks.

8. The movement of the nylon plate in the slideway is realized by four groups of imported high-density polymer polyethylene guided support slider, which reduces the sliding resistance and wear of the movement vice compared with the commonly used bearing steel and other rigid slider.

9. Sliding plate guide roller structure, guide plate inverted R design, nylon guide, easy scraping.

10. Setting the garbage backflow prevention device, blocked by the baffle plate, to ensure that there is enough space in the hopper to realize the operation.

11. When the loader lifts, the scraper can be cleaned twice to ensure that there is no residual garbage when discharging.

12. The driver's cab is equipped with an operating system, through the driver's cab operation, the process of lifting the filler and pushing the plate to unload the garbage can be completed.

13. Equipped with electronic throttle, it can accelerate and set speed automatically. The electronic throttle ensures the matching of hydraulic oil pump and engine speed.

14. The tailgate and the left and right sides of the cab are equipped with contact buzzers.